You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2632 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 9 posts

Sunday, October 2nd 2011, 7:45pm

by jag1967

Hunter valve

No, its correct. That's why I find it so odd.

Sunday, October 2nd 2011, 6:39pm

by Central Irrigation

Maybe it's in backwards.

Sunday, October 2nd 2011, 5:54pm

by jag1967

Hunter srv

Done that as well

Sunday, October 2nd 2011, 5:32pm

by Central Irrigation

Try tightening the four bolts on the top of the valve. Play with the flow control if it has one. If all else fails, disassemble the valve and visually inspect the bottom of the diaphragm and the rest of the internals.

Sunday, October 2nd 2011, 3:03pm

by jag1967

Hunter SRV 1" Valve leaking

it is, all the way down.

Sunday, October 2nd 2011, 3:00pm

by mrfixit

Make sure the solenoid is screwed on all the way. Snug.

Sunday, October 2nd 2011, 2:55pm

by jag1967

Hunter SRV 1" Valve leaking

I disconnected it as well, I tried it.

I made sure I had no power to the unit, also replaced the selanoid with another one and it's still leaking

Sunday, October 2nd 2011, 2:49pm

by Wet_Boots

Disconnect the zone valve wire from the controller, to eliminate it as a possible problem

Sunday, October 2nd 2011, 2:44pm

by jag1967

Hunter SRV 1" Valve leaking

Anyone that can help with some pointers. I needed to replace a 1" inch Hunter SRV valve with a brand new one. So i did, but it still leaks. I checked for Debris or anything that may be blocking the diaphragm and nothing was blocking it open. I also disconnected the valve to see it might close it but it didn't. out of 8 valves, this one styas open when the water main is open. Any help to troubleshoot is appropriate it.