You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1126 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Wednesday, September 21st 2011, 10:22am

by Wet_Boots

You have to wonder just when did a pro ever take a piece of one brand of sprinkler head, and put it into another make of head, in order to effect a repair.

Tuesday, September 20th 2011, 6:14pm

by Central Irrigation

Every single head on the market has issues when they age. PGP's leak from the collar but seldom stick up, Nelson's are a pain to adjust and stick up, Toro 800's stick up but rarely stop rotating, Toro 700's rarely stick up but stop rotating, Rainbird 5000's stop rotating.... The only head I've seen worth a darn is the Hunter 1-20, but good luck trying to stay competitive installing a system with these.

Monday, September 19th 2011, 8:49am

by Wet_Boots

All I can say, is that the engineering business must really be in the crapper for someone to avoid spending a few hundred to completely eliminate the issues with the sprinkler heads.

Monday, September 19th 2011, 7:22am

by mitchgo1 (Guest)

Just buy one and try it..

Monday, September 19th 2011, 5:07am

by DIY-Dan (Guest)

@Wet_Boots: Reread what I wrote more carefully. Your comments indicate several misunderstandings about what I wrote.
DIY-Dan: Remember that there is friction in the seal or it wouldn't be much of a seal. Also, if gravity was enough to pull down the rotor, then the spring would not be necessary, yet every rotor has one and many are criticized for not having a strong enough spring. Hunter makes a point of saying in their literature that they have a heavy-duty spring. When I lightly step down on the rotor, it goes down without much effort and the water in the casing sprays out. If I lift the rotor without water in the casing then let it go, it retracts all the way with the weak spring, so yes water in the casing can hold it up.

Wet_Boots: No, friction holds up the heads, because heads will stick up even when all the water has drained out

I agree that friction can and does hold up a head in the majority of cases due to sand/grit embedded in the seal or a shrunken seal causing binding on the rotor shaft. There are other cases where other forces working within the rotor besides the obvious ones (friction, gravity, and spring potential) play a role when the spring potential is marginal -- those are the cases I'm talking about. I could give you a detailed engineering analysis of the forces, but that would require much more time than I care to devote to it here.


In my original post, I never said that the head was stuck all the way up, or that all of the water drained out -- I said that it did not fully retract -- an important distinction since it puts all forces besides the obvious ones in play. IMHO, a properly selected spring should have enough potential (strength) to not only fully retract the rotor in a real-world dirty environment, but to firmly seat it in the retracted position to seal out dirt, debris and roots. Yes I know there is a balance between the spring strength and the minimum water pressure that will extend and operate the head. A young Nelson spring works well in nice clean conditions, but as it ages or friction increases due to dirty seals, the rotor too easily fails to fully retract, which allows larger dirt and grit particles to get into the seal eventually causing the rotor to stick fully extended due primarily to friction, or more accurately, stiction.

Quoted

DIY-Dan: I have also been unable to find a suitable replacement.

Wet_Boots: Well, now you are losing credibility. These heads are replaced by PGPs every single day, because, after all, the Nelson heads were copies of PGPs.
Sorry, the credibility lost here is yours. You quoted me out of context. It is clear in the original post above that I was referring to a replacement for the Nelson spring not the head. The previous sentence specifically states "Nelson spring".

Quoted

Wet_Boots: Your ideas about what companies should provide are certifiably hilarious.

I'm glad you had a good laugh, but again, reread what I previously wrote - I didn't write anything about what a company should provide, I stated what Hunter's PGP service information states that they do provide.

We both agree, as I originally stated, that most people would just replace the head, but if that's what I wanted, I wouldn't have opened this thread and asked my question since there are numerous existing threads with head recommendations.


So enough already!! I apologize for wasting your time and I regret wasting my time here with my "hilarious" question. Yes, it was indeed a teachable moment. :rolleyes: I will consider this thread closed and seek an answer to my original question elsewhere.

Saturday, September 17th 2011, 4:52pm

by Wet_Boots

@Wet_Boots:

My water comes from my well so my water costs are minimal. Secondly, what I spend on water is irrelevant since I would spend it whether or not I bought new rotors.

Remember that there is friction in the seal or it wouldn't be much of a seal. Also, if gravity was enough to pull down the rotor, then the spring would not be necessary, yet every rotor has one and many are criticized for not having a strong enough spring. Hunter makes a point of saying in their literature that they have a heavy-duty spring. When I lightly step down on the rotor, it goes down without much effort and the water in the casing sprays out. If I lift the rotor without water in the casing then let it go, it retracts all the way with the weak spring, so yes water in the casing can hold it up.
No, friction holds up the heads, because heads will stick up even when all the water has drained out

Quoted

I am an engineer who has been trying to make the aging Nelson springs work for several years without success.
Everyone needs a hobby

Quoted

I have also been unable to find a suitable replacement.
Well, now you are losing credibility. These heads are replaced by PGPs every single day, because, after all, the Nelson heads were copies of PGPs.

Quoted

Some of us would rather fix what is broken if possible and economical rather than just throwing away otherwise perfectly functional equipment.
Just because the gear drive still works doesn't mean the head's a keeper.

Quoted

I just became aware today that Hunter springs are available as a replacement part so I thought I would ask if it would work. Hunter does list the spring as a replaceable part and they can be ordered, so yes they will help their customers with repairs.

My question was whether or not the Hunter spring will work in a Nelson 6000 rotor. If you don't know then your contribution is not helpful. Belittling me and treating me as an idiot when you know nothing about me is not appreciated.
When someone shows up and provides a teaching moment, they are utilized for this purpose. You are not belittled. Your ideas about what companies should provide are certifiably hilarious. You install a 100-mesh strainer in your sprinkler supply, because you are on well water, and you replace the Nelson heads with PGPs or any of the countless other rotors that copy the PGP

Saturday, September 17th 2011, 2:49am

by Mitchgo

How old are they?

Nelsons have a common tendency to stick like that when they are aged. Particularly with dirty water.

The water sitting at the bottom of the the rotor is at atmospheric pressure.. as boots said water can't hold anything without pressure... So it's your head not the water..

I doubt the hunter pgp spring will fit.. Buy 1 and try it out- you'd be the first....

Why buy a spring when you can buy a new decent head for $10-20.. I mean if the head is 10 years old and it cost $10 .. Is $1 a year investment not good enough for you? Just replace em..

Also have fun re-adjusting 50 nelsons.. I don't know how those whoever installed them dealt with that on a constant basis.

Friday, September 16th 2011, 11:03pm

by DIY-Dan (Guest)

@Wet_Boots:

My water comes from my well so my water costs are minimal. Secondly, what I spend on water is irrelevant since I would spend it whether or not I bought new rotors.

Remember that there is friction in the seal or it wouldn't be much of a seal. Also, if gravity was enough to pull down the rotor, then the spring would not be necessary, yet every rotor has one and many are criticized for not having a strong enough spring. Hunter makes a point of saying in their literature that they have a heavy-duty spring. When I lightly step down on the rotor, it goes down without much effort and the water in the casing sprays out. If I lift the rotor without water in the casing then let it go, it retracts all the way with the weak spring, so yes water in the casing can hold it up.

I am an engineer who has been trying to make the aging Nelson springs work for several years without success. I have also been unable to find a suitable replacement. Some of us would rather fix what is broken if possible and economical rather than just throwing away otherwise perfectly functional equipment. I just became aware today that Hunter springs are available as a replacement part so I thought I would ask if it would work. Hunter does list the spring as a replaceable part and they can be ordered, so yes they will help their customers with repairs.

My question was whether or not the Hunter spring will work in a Nelson 6000 rotor. If you don't know then your contribution is not helpful. Belittling me and treating me as an idiot when you know nothing about me is not appreciated.

Friday, September 16th 2011, 5:58pm

by Wet_Boots

Water can't hold up anything unless it's under pressure. Just live with the heads if you don't want to buy new ones. Past generations did the same, with older makes and models of sprinkler heads.

You could install all new heads for a cost of about 300 dollars. As for springs, good luck - no manufacturer is going to lift a finger to help a homeowner who won't spend a few hundred, especially when they're probably spending more than that each year on water.

Friday, September 16th 2011, 5:42pm

by DIY-Dan (Guest)

When the spring pulls the rotor down, the water in the rotor body is forced out the nozzle. If the spring is too weak to pull the rotor down, the residual water in the pipe and rotor body is holding it up.