You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2433 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, October 24th 2011, 8:38am

by hudr0004

Thanks for the help. I emailed Hunter directly and they walked me thru the wiring - it had been wired incorrectly which was allowing it to work - but erasing the programs each day.

Thursday, October 20th 2011, 9:32pm

by Wet_Boots

Reset the controller to the factory default. That probably gives you start time A1 at 8 AM, for 10 minutes per zone. Modify that program as needed. Do nothing else. Do not add any start times for now.

Thursday, October 20th 2011, 12:40pm

by hudr0004

I tried a complete reset with no luck. I've since had another controller sent to me in case there was a defect but have had the exact same problem. I'm correctly setting it up to run but the start times get wiped off overnight. Anyone have any thoughts?

Monday, September 12th 2011, 2:14pm

by Wet_Boots

Reset the controller and start over from scratch.

Monday, September 12th 2011, 10:16am

by hudr0004

X-Core controller start times keep resetting to "Off"

I installed an X-Core controller and programmed it to run program A at 6:00 a.m. and 6:00 p.m. - and it will run that successfully one time. When I come back the next day all of the start times are set to "Off". I have the Date/Time settings all correct and I have it set to run every day of the week with no intervals inbetween. Still it seems like every night at midnight, the controller resets to start times to "off" - anyone have similar issues or any thoughts?