You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1173 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Sunday, September 11th 2011, 11:02am

by Wet_Boots

Underground well pumps have sealed motors - above-ground pumps do not - go and find your local electrical inspector and get his input on the legality of placing your pump below grade.

Saturday, September 10th 2011, 9:42pm

by TeaMan

No different than an underground well pump to service a rural house. I grew up with one and never saw a failure. Besides the why wasn't the question.....

Friday, September 9th 2011, 10:32pm

by Wet_Boots

And tell us why your pipes will never ever break and why your pump will never ever develop a leak.

Pipes break. Pumps leak. Get creative and hide the above-ground pump. If you don't feel creative, buy a fake rock to cover it, for the same money you would spend on an underground enclosure.

Friday, September 9th 2011, 9:37pm

by TeaMan

I live on a hill, there will be no flooding, the yard slopes so heavy rain will run off and if the pump box is a couple inches above the ground, it won't get any water in it. If it does, it will be minor and the gravel bed at the bottom will take care of that. Why below grade, I don't want a pump house sitting in the middle of my yard, and I wasn't able to find a suitable submersible pump that didn't require an unsightly pump house above ground in the middle of my yard.......

Friday, September 9th 2011, 1:20pm

by Wet_Boots

Why place a pump below grade? Have you considered flooding?

Friday, September 9th 2011, 7:11am

by TeaMan

Pump box and components question

I'm installing my pump underground next to a Cistern that catches rain water. Does anyone know of a source for a box similar to a valve box that is big enough to house a pump and filter?
Also, any advice on any kind of filtering device for the bottom of the suction line like a foot valve with a strainer? The suction line is 2".
Filters: Any advice on a filter after the pump on the supply line? How about the mesh size? I read that 100 mesh would be fine to keep the sprinklers clean.
Float: Any advice on a float switch? I need a float switch to disable the pump when the water level is too low in the cistern.
Thanks
TeaMan