You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2844 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, December 4th 2006, 2:03pm

by Wet_Boots

Popup impact heads and sand do not play well together.

Monday, December 4th 2006, 7:04am

by beansly

Ok, I figured it out. I had to get my needle nose pliers and stretch the spring further to power through any sand that gets in the joint of the head. I think I pet a little to much pressure but it will have to do.

Now I get to wire up my rain bird indoor computer. THe JOY!

Monday, December 4th 2006, 5:35am

by beansly

Orbit 55100 popup knockers

I just read all the posts to stay away from orbit alltogether.

BUT

I'm on a VERY tight budget and installed 3 of these 55100 popup knockers and hit trouble. The part of the head on the spring that impacts the water is getting stuck open. Mind you that I tested them all before installing them to make sure the "flapper" as i call it is operating smoothly. Everythinbg worked fine untill i installed them ,of course... So now the all plastic heads except the spring, feel like they have sand stopping them from closing into the water stream. Hence they do not "impact" or "knock" as advertized. They do however "popup" [:)]


Also They have 2 inputs for water pressure. One of the side, and one on the bottom. I can see the screen on the bottom hole to filter debris, but i cant see a screen in the hole on the side "which i'm using."

Any tips to lubercate the plastic heads? or sand them? I cannot even find instructions on how to dississemble the damn things or a exploded view for that matter.

BEansly