You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 620 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, September 7th 2011, 7:19pm

by Central Irrigation

Is the error message showing up on the controller display or is it a flashing light on the decoder module?

Monday, September 5th 2011, 10:09am

by Wet_Boots

2-wire problems belong to the installer - this is specialized electronics and special tools are used to diagnose problems.

Monday, September 5th 2011, 9:42am

by waterwarrior

valve problems

Have a hunter ACC Controller on system. Area with 3, 1 1/2 valves won't shut off according to onsite witness. When I go there and run a test, the valves are a little slow in closing but do eventually close. Onsite witness says there is an ERROR
message on controller but nothing in the log. Has decoder and 2 wire system. Don't know what else to check.