You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1050 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, September 13th 2011, 6:36am

by CRI IRR

I agree with Mitchgo. Also, there should be a flow control on the valve. See if you can turn the flow control off and that should at least help slow down the water flow.

Wednesday, August 31st 2011, 9:06pm

by Mitchgo

Time to upgrade your system..

You probably have a shut off valve somewhere.. Basically the point of connection where the tapped into your water supply.

Replace those ancient valves and get a back flow device installed to act as your isolation for the sprinkler system and your house.

Wednesday, August 31st 2011, 7:08pm

by r_nally

Urgent - Can't get valve closed

I posted earlier about some older hydro rain valves. On one of the valves that was not working I mannually turned it on and now it wont shut off, I have no way of shutting of the sprinklers without shutting down water to the entire house.

I have pulled the bleeder rod several times and let water spray up into the air but it wont shut off. Any instant advise would be greatly appreciated.