You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2497 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, August 23rd 2011, 11:43am

by Wet_Boots

If the controller is sending power to the valve, and the valve stops operating, there may be a short circuit that is cutting off the watering. These don't always behave instantaneously.

Monday, August 22nd 2011, 5:37pm

by hi.todd

Check your program button and check all of your programs.'

Monday, August 22nd 2011, 4:03pm

by horse_98

valve shuts off early

I have one zone on a 6 zone clock which will not run for the allotted time. I have switched the wiring from one zone on the clock to another and that did not change anything. I have switched things around until the only thing that remains the same is the zone valve. Why would a zone valve shut off after 2 or 3 minutes when it is scheduled for 20. This is an older system that has been working properly until recently.
Thanks for your help.