You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1215 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, August 21st 2011, 3:44pm

by mrfixit

The diaphragms are probably getting old and stiff.

You could Jerry rig it by adding a second O-ring under the solenoid as a temporary fix.

If you replace the valves I recommend you buy the Irritrol 311A. The ports are a similar width apart.

You could use the same brand valves. They're not the greatest but you could do worse.

http://irritrol.com/valves/valves_311as.html < cut n paste the link.

P.S. The valves have to be at least 5 inches apart for the 311's to fit side by side. Otherwise you'd have to stagger the height.

Saturday, August 20th 2011, 8:14pm

by Mitchgo

It's possible the o-ring is missing

but those are horrible crap valves to begin with

replace the valve

Wednesday, August 17th 2011, 5:28pm

by Wet_Boots

make and model of valve would help - a possible cause of valve-opening problems is excess glue blocking a waterway

Wednesday, August 17th 2011, 11:08am

by trakluvr15

Pressure issues related to the Solenoid i think

Hi guys, need a little help! I installed my own irrigation system a few years back, and I have been battling an issue with no resolution so far. That little black solenoid on the valve leaks from the base (threaded portion) all the time, enough that it floods the area around it. When I tighten it down, it stops leaking, but then I get almost no pressure out the heads of those sprinklers when they come on! I have tried cleaning it out and even went back and forth with the company via email with no help. Has anyone else experienced this problem? Any help would be greatly appreciated!!

Valves are Orbit - Watermaster, model #57224

Steve - Visalia, Ca.