You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2889 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, October 20th 2006, 9:43am

by mrfixit

Hi, I'm thinking you mean PGP. It sounds like the seals are bad. I'm assuming they've been installed for quite some time since so many are leaking. You'll need to buy new sprinklers.
What you can do though is just take the working parts out of the new sprinkler and screw it into the old body so you don't have to completely dig each one up. Good luck!


Friday, October 20th 2006, 5:36am

by docpat

leaky hunter pcp sprinkler head

I am getting a large amount of water leaking out of the bodies of several of the sprinkler heads when the zone is running. They are pop-up heads and it appears that the water is coming from where the pop-up and body meet, but it is hard to see exactly because of the volume of water coming out. Can this be repaired or must I replace it? It is happening to several of the heads. Thanks for your help.