You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1110 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, August 18th 2011, 11:23am

by Trencher62

Waterless

Turn on one of your zone valves manually, do you have water? If not, check the water meter -(if other than the one for your house), or see if you have an isolation gate valve that shuts only the sprinlkler system thats been closed. If you have water, then check to see if you have power A) to the clock, and B) from the clock. Checking to the clock, has a breaker been shut off or possibly tripped, if so reset it. If the clocks LED Display is active then you should have power. More often than not, the LED will display - NO POWER - If there's a battery back up that's still active, disconnect to see if LED's powered by it. To check A) power from the clock and B) Wiring to the valves, all you need is a working solenoid. Remove the white common wire(s), or whatever color wires are connected to the clocks common terminal , then take one of the solenoid wires and wire nut it to these common wire(s) you removed from the terminal, take the other solenoid wire and connect it to the common post in the clock. Now turn on each zone via the clock. The solenoid should actuate if there's - A)power from the clock, AND B) if the wires are good traveling to the valves. If their all dead, (solenoid does not engage for any of the zones), then at the very least the common wire has been cut, the solenoids are all bad or multiple wires have been cut. If the solenoid clicks on some of the zones, then only some have solenoid or wiring problems. Remember, normally, the common travels to all the valves while the lead, or hot wire only travels to individual valves. Check anywhere in the yard you've dug for plants, fencing, yard decorations or anything else underground, you'll probably find the problem. If you've had lightening strikes or power surges, you may find you have solenoid problems, these can also affect the clock as well. If you find the cut wire(s), take care to reconnect them according to their color code, or correctly, especially the COMMON wire(s). After testing, reconnect wires back to the clock as they were originally. .... 8o

Friday, August 12th 2011, 12:58am

by Mitchgo



Maybe you cut a wire or two when you were digging?

That's exactly what I thought reading halfway through his post

Thursday, August 11th 2011, 3:35pm

by mrfixit

Maybe someone turned the water off to the sprinkler system. Can you turn a valve on manually at the valve?

Maybe you a wire or two when you were digging?

Is the transformer warm? It's supposed to be warm. If it's cold it's either dead or there's no power coming out of the outlet.

Blown fuse?

Thursday, August 11th 2011, 1:54pm

by kimmiesue525

Control Box working ok, but no water comes on

We've been in our house for a year now and the system has been working fine this whole time. I do have a couple heads that I'm repairing/working on right now. But, the issue right now is that the water won't come on at all. I've checked the programming on the box (Irritrol system) and tried to turn on specific zones. Nothing is working. I looked through the manuals' trouble shooting, but nothing seemed to apply. However...I'm a rookie at this.
Any thought would be appreciated!
Kim