You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2661 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, August 5th 2011, 9:43am

by Wet_Boots

look up "bucket test"

Friday, August 5th 2011, 8:49am

by Jarhead

I searched and nothing here seems to be the answer I'm looking for so I'm gonna ask it myself.

I've decided to use the free rainbird design approach. I have it all filled out except for the well pressure part. It wants to know what my "Capacity of the pump at the following pressures" is at 30psi, 40psi and 50psi in GPM. How would I find this out since the pressure is constantly changing with the usage??

Monday, August 1st 2011, 9:15am

by Wet_Boots

If the system uses, for instance, Hunter PGP heads and a Pro-C controller, you can fit the watering to most any well supply. As much as a comprehensive well test might be desired, it's just as easy to swap rotor nozzles if the first set doesn't match the supply.

The one thing to ask about, is if there is going to be a strainer in the sprinkler supply. A 100-mesh Vu-Flow strainer is not too expensive, and it keeps any particles out of the system.

Monday, August 1st 2011, 8:14am

by Jarhead

Designing for a well

Just got an estimate for a system in my front yard. The guy came and measured the area, came up with a 3 zone, 15 head system but never even turned on the water. I'm figuring since it's using a well that the system would need to be designed around the amount of water I get from the pump. He said theres no way for him to test the well other than a "drop test" that would take him 4 hours to complete. Is this correct?? I don't want my pump to blow out from excessive use but I don't know if that would be the case or not. I mean, what's the difference if I put out a bunch of sprinklers on my garden hoses and run them all day or if the hoses and sprinklers are buried? Doesn't seem to be a difference as far as I can see.

Any ideas?


PS, not sure if the "owner" of this forum checks in but if so, I could not post from and android phone. I could put a subject in but then I couldn't type in this "body" field. Might want to look into that.