You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4316 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, August 28th 2006, 11:49pm

by Wet_Boots

Check your local codes. Some areas will forbid the practice as an electrocution hazard. In any event, if you only need to gain ten feet of head, you have no use for a submersible pump. A standard 3/4 HP utility type could lift 30 gpm.

Monday, August 28th 2006, 3:57pm

by RainMan

Submersible pump

Has anyone used a submersible pump in the place of a regular pump(pumping out of a lake). If so,<font face="Andale Mono"></font id="Andale Mono">[8D] did you us a pump start relay or a bladder tank and pressure switch. Next problem , choosing the right pump? I will be flowing about 30 gpm and total head is about 10'.[8D]