You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1131 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, July 25th 2011, 11:12pm

by Mitchgo

the src's have been failing a lot lately..

We recently switched to a different brand because of the failures

Like sprinkler said , verify the water is turned on.

setup a dummy program set to come on a few minutes after you program it and see if it kicks on.. If it doesn't the src is bad . Why not have a regular controller on this valve?

Monday, July 25th 2011, 10:07pm

by AutomaticSprinklers

Step 1 confirm that you have water going to your system.
Step 2 once water is established check for voltage going to the valves at the controller.
Step 3 check the voltage at the valves.

Follow up which step is the problem and I can work on a more in depth explanation.

Monday, July 25th 2011, 1:15pm

by GeorgeBorge21 (Guest)

Hunter SRC controller help

I just noticed my sprinklers have not been running the last two weeks or so. The controller is still programmed correctly but the sprinklers aren't running. Trying manual didn't work either. Anyone have any idea on what could be causing this problem?