You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 9 posts

Wednesday, August 20th 2014, 1:28am

by order_cialis (Guest)

order cialis

Tuesday, August 19th 2014, 2:44am

by generic_cialis (Guest)

generic cialis

Saturday, August 16th 2014, 5:34pm

by Pharmc219 (Guest)

Good info

Very nice site! cheap goods

Saturday, August 16th 2014, 5:33pm

by Pharmd435 (Guest)

Good info

Very nice site! <a href="">cheap goods</a>

Friday, June 20th 2014, 4:18pm

by irrigirl (Guest)


Are you getting enough power to the unit? Do you have a transformer?
Did you replace the battery and get a display?

Friday, June 20th 2014, 4:18pm

by irrigirl (Guest)

Are you getting enough power to the unit? Do you have a transformer?

Tuesday, July 12th 2011, 6:46pm

by hi.todd

If the display is bad or the front panel. You could pay a lower price to just replace the front panel.
Some places will help you out and some won't.

It does not hurt to ask.
But the last thing you want to do is buy a display and then find out you need a whole clock.
Good Luck :thumbup:

Tuesday, July 5th 2011, 9:10pm

by Wet_Boots

Hunter isn't going to help you mess around with their controllers - and I doubt if any professionals will either. The only time a soldering iron has been of use with modern controllers was for a capacitor replacement in one controller's power supply.

Tuesday, July 5th 2011, 7:11pm

by jrb

Outdoor Hunter Pro-C PC-300 LCD display problem

My controller's display has become suddenly unusable because some (not all) of the LCD segments aren't coming on fully to the point where I can't really tell if I'm programming it right. I though it might be because of the contacts to the LCD might be bad but I've taken it apart and all seems well, no sign of water damage or bad capacitors etc. I did notice there is a 3.2v battery inside the controller but it still seems to be at full voltage. The controller has been in operation for about 3 years. Strangely the battery is soldered in! Isn't that going to need replacing at some point? Seems a poor choice.

If I can figure out the pinouts to the the ribbon cable I'm more inclined to build a replacement controller than buy another one. Anyone have the specs on those?

- James