You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2512 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, July 5th 2011, 2:27pm

by Wet_Boots

one liter per hour, you can find, but you buy it a hundred feet at a time, to get some less popular emitter spacing - and it is 1/2-inch tubing, not 1/4-inch

Tuesday, July 5th 2011, 2:07pm

by my911

Micro Tubing

I have 1/4 in tubing feeding 3 ft wide planters. There are 3 emitters in each planter ( 1/2 gph).
I want a more even flow distribution and have looked into micro-tubing. Emitter specs are hard to find The best I have been able to find is 1 gph with emitters every 18 inches.

Does anyone know of a product with emitters about every 6 inches ; rated at 1/4 gph?

Please feel free to respond via email 8)