You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2888 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, June 29th 2011, 10:51am

by kaje

Thanks for your help. I'll tinker with it after work.

Wednesday, June 29th 2011, 10:33am

by Wet_Boots

Close both valves - open the main supply valve - open the PVB inlet valve - then open the PVB outlet valve

Wednesday, June 29th 2011, 9:12am

by kaje

So do I just need to close the inlet valve, turn the water on and then slowly open the inlet valve back up?

Wednesday, June 29th 2011, 9:06am

by Wet_Boots

Maybe a zone stuck open and dropped the pressure enough to create the situation

Wednesday, June 29th 2011, 8:15am

by kaje

Febco 765-1 Leaking

Over the winter, my Febco 765-1 froze and busted in two spots (prior to learning how to winterize). Well, this past weekend, we got around to repairing it. It has worked for a couple of days (Saturday & Monday) and then I wake up today to find it flooding out of the bell again. I took the bell off and it doesn't appear to be broken like it was the first time. What could be causing this? Here's some pics if they'll help out: