You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1271 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, June 27th 2011, 4:37am

by mrfixit

Does the valve adapter turn off when you disconnect the wire? I'm thinking it does. It's either wired wrong or the controller's bad.

Did you change the valve adapter because it had the same symptoms?

Monday, June 27th 2011, 12:00am

by Mitchgo

Is the valve body the same make/ model?

Sunday, June 26th 2011, 10:44pm

by lkc91311

superior control valve on when supposed to be off, off when supposed to be on.

I just installed a new Superior automatic brass actuator control valve into an existing brass body. When I turned on the water, the sprinklers came on, even though the zone was "off" per the control box timer. I thought maybe it has to "cycle" through to get in sync. I manually turned the zone on (through the control box timer), and the actuator turned off. As soon as the cycle timed out, the actuator turned back on. So, it's on when it should be off, and off when it should be on. I bled the actuator, same thing. I reversed the wiring, no change. It's as if the magnet is on when it should be off and off when it should be on. This makes no sense to me. Please help!