You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4357 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, July 19th 2006, 7:07am

by Wet_Boots

You might consider having the installer do the repair. Connecting pipe is simple, if you have the tools and the knack. Maybe ask for some instruction at a local home center.

Monday, July 17th 2006, 12:10pm

by Deiantre

Pipe loose from Valve (sprinkler side)


I am a newbie. The pipe on the sprinklers side of the valve came out. What is the appropriate way to fix this?

The valve is a Rainbird 100 DV. The sprinklers are Hunter SRS.

Note, also I found some dirt in the pipe, probably from being disconnected.

The house and irrigation system are little over two years old. We have been the only owners.

Any suggestions or comments are appreciate.

Thanks in advance