You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1204 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, July 4th 2011, 9:32pm

by mike1059

open valves

When you turn the main water off then back on does one valve come on or do all of them or none. Knowing which will tell you if the problem is a bad valve, one which the flow control may be open to far or a wireing problem.

Thursday, June 23rd 2011, 8:37am

by Wet_Boots

Find your valves, and save some hand-wringing. You may have an example of the Domino Theory as it applies to sprinklers. Zone valves need sufficient upstream pressure to close reliably, and one stuck-open valve may lower supply pressure enough that all the zone valves will fail to close.

Wednesday, June 22nd 2011, 10:16pm

by Merlin1477024

There shouldn't be a mud hole. There's something wrong with the pipe or there's something wrong with the valve. It's not a wiring problem.
I'm not sure what valve you mean. The master valve or a zone control valve.
Each zone has a valve, but they are not in a central box. Where this boxes are at...I have no idea.
I may need to rent a tool to find them that I've seen on a website. But, what I don't understand is why ALL zones try to come on at the same time if there's not a short across all the control wires and they are all making a short circuit through wet ground. (The mudhole is because we got about 2" of rain after 5 months of drought.)

I appreciate all the guidance received.

Wednesday, June 22nd 2011, 12:33pm

by mrfixit

There shouldn't be a mud hole. There's something wrong with the pipe or there's something wrong with the valve. It's not a wiring problem.

Wednesday, June 22nd 2011, 8:46am

by Merlin1477024

Thanks for your reply.

I was running through the system, repaired that head (hard digging near where the bundle of control wires run alongside the house perhaps. After the repair is when all zones came on.

Do you think I have cut all main control wires and not the common wire?
If I cut the black ones (white is used for common), would this explain why all 8 zones try to open at once?
Would this explain why pressure is low as the water pressure for 8 heads is being divided among 64 heads?

I can post pics if needed, mostly just a pic of a mud hole.

Oddly enough, it's pouring rain at the moment. First hard rain in at least 2 months!

Wednesday, June 22nd 2011, 12:06am

by Mitchgo

Did you turn the water physically on and then all the heads had water comming out or were you running through your system- repaired that head and then then all zones came on>?

Tuesday, June 21st 2011, 10:47pm

by Merlin1477024

All heads weak spray at same time...after replacing 2 heads and digging.

Recently I started my 8 zone system after long non-use. All zones ran, but a head was popped off, heads mis-aligned, poor pattern, etc. Last year when installing dog fence, I cut a pipe feeding a head. Yesterday I replaced that head, but then...all zones try to run at same time and now have very low pressure. When I replaced the broken pipe I may have cut all the wires running into the box. I kind of think this means the common wire is shorted out and the connection is being made on all zones in wet mud.

Also, there is no central box for all of the valves. How could I locate each valve? I have a pretty big yard in my view.