You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2556 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Tuesday, June 21st 2011, 12:43pm

by grey

I've made some changes to my plan and it seems to be working out better than that.
Well, yes I carefully measured the property to begin with.

here's my backyard plan with some corrections. 1 square is 10 ft. Disregard numbers. I guess will be sticking with Hunters PGJ or Rainbird 3500. Haven't decided yet.

By the way I found pretty cool software Pro Contractor Studio. You can download demo version. You can draw your plan,. It has database of all sprinklers with specs. In there you can check water distribution. I checked my design and it looks good. At least in an ideal world. I shall see the real world performance :)

Tuesday, June 21st 2011, 10:40am

by wsommariva

I'm not an expert but recently did my own small install successfully. Why don't you want to add heads to the center of the property?

In my case I planned carefully, installed it and then made an adjustment or two to get proper coverage. Actually going from my plan on paper to actually measuring with a tape on the property caused my entire plan to change. But I had a very unique watering area.

Saturday, June 18th 2011, 6:41pm

by Wet_Boots

Reliability issues - design isn't fatally weak, but I figure you redraw it, once you lose mini-rotors

Saturday, June 18th 2011, 5:35pm

by grey

What's wrong with mini-rotors?
Do I have adequate coverage on my plan?

Saturday, June 18th 2011, 5:23pm

by Wet_Boots

Avoid the mini-rotors, and stick with PGP heads and/or popup sprays

Saturday, June 18th 2011, 4:58pm

by grey

Calling for expert advice. Sprinkler layout

I am in the process of designing my first sprinkler system. Following I came to the point of sprinkler head placement. After all pressure losses I have 30-35 PSI for sprinkler heads so I don't want to stretch spacing more than 30 ft. I am thinking on using something like Hunter PGJs and some PGPs. I have 11-12 GPM available with 60 PSI static. I am concerned about areas marked with red stars and red space in the second picture as there is not 100% overlap in the first picture. In the second picture coverage in the center seems less than along the perimeter. What is your opinion?