You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2675 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Saturday, July 23rd 2011, 6:31pm

by Wet_Boots

Read your owners manual

Saturday, July 23rd 2011, 5:24pm

by Lin (Guest)

missing station 3

I saw a reply to the same problem I am having - missing station/zone 3. They said to reboot the controller. How do you so this? Is it the same as resetting it by pressing the back?

Monday, June 20th 2011, 10:50pm

by kingerys

Perfect! Works like a charm now! Thanks!

Monday, June 20th 2011, 8:55pm

by Wet_Boots

You should reboot the controller.

Monday, June 20th 2011, 2:03pm

by kingerys (Guest)

Station 6 Disappeared

I have a Hunter irrigation system with a Pro-C controller. I have 6 watering stations/zones. All stations have worked properly in the past. Station 6 no longer shows up on the controller's digital display. Sprinklers in station 6 no longer work. All other stations and sprinklers work normally.

How do I troubleshoot this problem?