You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2566 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, June 14th 2011, 5:41pm

by gaftech

Thank you, sir. I kinda figured this would be a long-shot at best. This whole thing started because of a stuck valve. Having only owned this house since January, I decided to check out the system. Since the previous owner left me nothing showing where the solenoid valves were located, I had to shut off the water to my house for a day. I finally located the shutoff valve to the sprinkler system after hunting for it for a day and a half...looked like a snake hole.

Anyway, I finally had to hire someone to come out and ring the lines to locate the valves. $900 later, I have a functioning sprinkler system with an out-of-date controller, and I intend to replace that as soon as possible. The guy I hired, a thorough professional, by the way, recommended going with the Hunter controller. I only have 7 zones at this house so it's much more manageable than the house in Sherman, TX!

But here's a plus! He'd never heard of the Sprinkler Warehouse and thanked me for showing it to there's another convert!

Thanks again,


Tuesday, June 14th 2011, 5:04pm

by Wet_Boots

I got an idea that you are out of luck, unless you can find a manual posted on the internet

Tuesday, June 14th 2011, 4:36pm

by gaftech

Buckner Controller MOD-10/18 Manual

Just wondering if anyone knows where I might be able to get a manual for this controller. I called Buckner (no answer), then Storm, who said I was out of luck. Any Ideas?

Sanger, TX