You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1900 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Tuesday, June 14th 2011, 2:26pm

by Wet_Boots

Well, stuff happens

Tuesday, June 14th 2011, 1:05pm

by pillboy

My house burned down.

Tuesday, June 14th 2011, 12:44am

by Mitchgo


oh well

like I said it's not a big deal.

Monday, June 13th 2011, 7:48pm

by pillboy

My "9 volt" Energizer rechargeable NiMH came in the mail today.

In teeny, tiny little print (had to put on my reading glasses) on the back label of the battery itself..."8.4 volt".


Friday, June 10th 2011, 12:42pm

by pillboy

Thanks Mitchgo. I searched this web site, Rain Bird, and eBay. I figured if it existed, eBay would have it.

Makes me want to take my VOM to these batteries and see what exactly they put out for volts. :D

Thanks to both you and Wet Boots for hanging out on this site and conversing with us homeowners.

Friday, June 10th 2011, 8:10am

by Wet_Boots

Since the charging voltage isn't likely to destroy the controller, it's hard to see what damage will result from putting an uncharged 8.4-volt battery in the controller


Maybe there were manufacturing limitations that had only six-cell forms of nicad and nimh being available

Thursday, June 9th 2011, 11:07pm

by Mitchgo

my google search came up with this in 30 seconds.. They're out there.

In any case it doesn't matter too much.. All it does is remember programming date/time if the controller is unplugged.

You can even put a regular 9v battery in there.. It will last for about 2 years.

Thursday, June 9th 2011, 10:06pm

by pillboy

The parts and accessories section of Rain Bird's online store does not list a back-up battery. I tried calling the store, but apparently they don't have much for staff as the call eventually routed to voice mail with the only option to leave a message and they would call me back. I would be extremely happy to buy OEM...IF I COULD FIND ONE!

I hate to disagree with the professionals, but I am virtually certain that a rechargeable NiMH battery does not exist (like I was told at the battery store). Think about it, every NiCad or NiMH battery is a multiple of 1.2 volts. These batteries are made up of multiple cells and each cell is 1.2 volts, hence cordless power tools are 12v, 14.4v, 15.6v, 18v, 19.2v. I believe the chemistry of the rechargeable cell is what determines (or limits) its voltage.

The battery I took out of the controller is a Varta brand (from Germany) and is labeled "AccuPlus Ultra", 7.2 volts. I don't ever remember replacing this battery in the past, so I am 99% sure it is what came with the controller from Rain Bird. The controller by the way is an ESP-12LX+ (the manual is copyrighted 2001 and I think the irrigation system was installed in 2005).

Since the manual plainly states, and I quote, "The replacement battery must be a 9-volt rechargeable NiMH battery.", I am gonna go with the 8.4 volt I found at the battery store. Think about it, 8.4 is LESS than 9.0 volts, so it shouldn't fry the circuitry, and it is at least 7.2 volts which is what was being utilized in the past. Makes perfect sense to me.

And when you winterize systems, you should leave the controller plugged in (but turned "off") to keep the back-up battery charged. Repeatedly running the battery completely flat will kill them much sooner.

Thanks again for your thoughts on this.

Thursday, June 9th 2011, 8:23am

by Wet_Boots

You could always buy a 7.2 volt battery pack (6 cells) and use it instead

Thursday, June 9th 2011, 1:37am

by Mitchgo

Are you sure that's even the oem?

boots and I have delt personally with 1000'ssssss of systems.. There is only one kind of Very old style system that uses more voltage then todays standards. The rb esp lx just using a regular rechargable 9v bat

Just put a rechargable 9v battery in. If you have the old model esp lx it will remember you time/date/programming when the controller is unplugged..

Better yet don't unplug it..Ever.. utilize the batter if you lost power to the house.. The consumption of the power to the controller when in the off position is usually less then a household alarm clock