You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4336 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, July 7th 2006, 4:52pm

by Wet_Boots

Too much flow. Too little pressure. Find a way to consume less water in the zones.

Friday, July 7th 2006, 5:19am

by chuck81

First Sprinkler System

Old system,new home owner. Spray heads will not come all the way up,some leak around the stem.I have three spray zones and 5 rotor zones. Rotor zones work fine. I replaced 5 spray heads in one zone and not much change. I had water meter changed because of pounding noise,fixed the noise.
I would like some advice on where to look next?
Thanks, Chuck