You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2567 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, June 11th 2011, 12:17pm

by Wet_Boots

They're cheap - get another one

Saturday, June 11th 2011, 12:15pm

by barryb

Pressure reducer squeal

The pressure reducer, (20 PSI for drip) is the source of the noise, a high pitched squeal. There is a small diameter (1/16th inch) hole designed into pressure transducer. With water pressure present, when I put my finger over hole, it takes about 10 seconds and squeal stops. I then remove finger and a little spit of water jets out and squeal starts again. Sometimes, there is a stream of water coming out of this hole as soon as valve above opens and pressurizes line.
What is going on?
Just replace the pressure reducer?
Thanks, Barry