You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2567 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, June 8th 2011, 6:29pm

by ddeferra

Hunter SRC Controller Locked in Off Mode

Mrfixit thanks for your help. It worked and my system is now running!

Wednesday, June 8th 2011, 2:05am

by mrfixit

Did you take the back up battery out when you unplugged it?


This came out of the manual for the SRC Plus. lol at the size of the font. Best I could do.

Clearing the Controller's Memory/ Resetting the Controller

If you feel you have misprogrammed the controller, there is a process

that will reset the memory to factory defaults and erase all programs and

data that has been entered into the controller.

1. Press and hold down the , and buttons.

2. Press and release the reset button in the lower wiring compartment.

3. Release the , and buttons. The display should now show

12:00AM. All the memory has been cleared and the controller may

now be reprogrammed.

Tuesday, June 7th 2011, 10:46pm

by ddeferra

Hunter SRC Controller Locked in Off Mode

I have a Hunter SRC controller. It worked last summer and over the winter when I went to turn it on the read-out only was in the Off mode. I can not program anything on the controller. I've tried to unplug it and then plug it back in without any change.