You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2568 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 7th 2011, 11:17pm

by Mitchgo

Please take some time and read through this entire website
irrigation tutorials
Water flow is just as important as water pressure. Tapping after your water meter or the point of connection to the house from the meter is the best way to get the maximum amount of water flow

Tuesday, June 7th 2011, 5:49pm

by bama323 (Guest)

use of sprinkler heads

I am putting in an irrigation system with 2 zones.My yard is 50 wide by 90 long.The piping is going to be 190 feet to the last sprinkler head whih are going to be Rainbird 5500s.My pressure is 90psi. I would like to run 4 on one zone.Can i do this with this kind of pressure or is it to far away? Thank you