You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2570 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, June 5th 2011, 10:55pm

by Mitchgo

sounds like you installed a wire into the master valve/ pump port

Or you have a master valve with several valves stuck on / manually turned on

Sunday, June 5th 2011, 9:21pm

by chris2cya

no control

i just bought a house with a sprinkler system installed. the controller was blank and wouldn't reset so I replaced it with similar rainbird controller. when I started the system, most of the sprinklers came on no matter what zone was being watered. any advice would be appreciated.