You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1200 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Tuesday, June 7th 2011, 7:36am

by Mitchgo

i still say there's a shut off somewhere that's not fully open

That's pretty much the only time I ever get pulsating from a valve. I service 1000's of systems . Start checking your crawl space

Tuesday, June 7th 2011, 12:30am

by Raimeiken (Guest)

Ok this is really puzzling. Now the 4th valve just turned on and it's not pulsating, which is good, but why is the 3rd one still doing it? ?(

Tuesday, June 7th 2011, 12:03am

by Raimeiken (Guest)

welp that didn't last long. When the valve started tonight as scheduled, the pulsating started again :cursing:

So now it's not a solenoid problem nor a diaphragm. Then what could it be?

Monday, June 6th 2011, 10:27pm

by Wet_Boots

valve diaphragms are part of the equation, when it comes to this sort of oscillation - changing them can be a cure - sometimes

Monday, June 6th 2011, 11:33am

by Raimeiken (Guest)

Looks like I've fixed the problem...hopefully it doesnt come back.

What I did was I tried switching the solenoids around from the zones that are working properly and that didn't seem to do the trick. So I placed the solenoids back to where they were and I opened up the diaphragms and swapped those around as well. So like, zone 1 & 2 are the good ones and zone 3 & 4 were the bad ones. I swapped 1 & 3 around and 2 & 4. And that did the trick! no more pulsating on all the valves!

What I noticed is that when I was removing the diaphragms from the bad ones that they just easily lifted off, while the 2 good ones had a little resistance to them like they were air tight or sucked into the valve. So when I was switching them around, I gave them all a push into the valves and really tightened up the covers.

So far none of the valves are pulsating. I'll update in a few days if this problem happens again.

Sunday, June 5th 2011, 4:58pm

by Wet_Boots

Maybe you have to reduce the pressure upstream of the system

Sunday, June 5th 2011, 2:40pm

by Raimeiken (Guest)

I forgot to add in that I have 2 of these installed




one on each valve. It's a drip manifold that splits the connection into 8.

on one of the valves, the pressure was so great that it blew out 2 of the unused/closed connections on the manifold. So I figured maybe the pressure is too strong, so I installed a pressure regulator on both of them and now that's fixed, but the pulsating still occurs after the pressure regulator was installed.

Sunday, June 5th 2011, 2:29pm

by Raimeiken (Guest)

fairly new. I installed them maybe 2-3 months ago but haven't fully tried them since a week ago because I've been working on other things in the frontyard.

All four of the valves are rainbird.

Yeah I find it odd as well and it only happens with the ones that are drip irrigation. ?(

Sunday, June 5th 2011, 2:21pm

by Mitchgo

How old is the system and what kind of valve?

It's possible, I just dealt with one like that on friday.

But to have both go out at the same time seems odd.

Sunday, June 5th 2011, 2:06pm

by Raimeiken (Guest)

But when I open the valve all the way manually, there is no pulsating. Could it be the solenoids not opening all the way?