You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4385 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 20th 2006, 10:36am


The solenoid is on your valve not the controller. Replacing that is a very straightforward and easy process. A shorted solenoid would definetly cause the FUSE display but it could also be shorted wires or something shorted in the controller itself. Reset it and see if it comes on only when a certain zone is activated.

To reset the FUSE flashing on your controller, just press the "Clock" button or I think even any of the "Start" buttons.

Saturday, June 17th 2006, 4:40am

by foxie299


Seems to be the solenoid (RICHDEL 446), Any advice on the how`s
of replacing a solenoid is appreciated. Thanks !!