You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1098 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Tuesday, October 18th 2011, 8:37am

by filtration (Guest)

32 Mesh not ideal for this project

Search the net for some more sources for this wire mesh material.



You cannot simply take the 32 mesh just because it is the only thing that the store has, look some place like this for a mesh specialist:



http://www.bwire.com/



Or try Mcmaster Carr, Home Depot, Lowes.





In the long run, you are not really doing yourself any favors by just taking the first mesh you see.

Thursday, May 26th 2011, 11:24pm

by HooKooDooKu

If your water is that dirty... you might want to look into auto flush filters.

Thursday, May 26th 2011, 10:27am

by 2Quik

I ended up finding a 60 mesh. I have irrigation water will my filter be full after daily use?

Wednesday, May 25th 2011, 10:24am

by 2Quik

Thanks for your help.

Wednesday, May 25th 2011, 10:10am

by Wet_Boots

Just a connection - you do have to (roughly) match the filter size with the water flow, to get the best results from any filter that swirls the water past the filter screen. Look for a 100-mesh filter, to work with a sprinkler system.

Wednesday, May 25th 2011, 9:51am

by 2Quik

32 mesh screen is all my local store has. I am assuming that i would need a 60-100 mesh instead. To answer you question it would be used to filter out sand, i get basic irrigation water.

another question if you don't mind. It's just a basic connection right? I would connect the filter from my main line then out to my valves right?

Wednesday, May 25th 2011, 7:08am

by Wet_Boots

32 mesh isn't what is recommended for sprinkler systems - what is being filtered out of the water?

Tuesday, May 24th 2011, 6:23pm

by 2Quik

Mesh Irrigation Filter

I am looking to install a Orbit 32 mesh irrigation filter with my sprinkler system. My mail water line is 1" and the mesh irrigation filter has in an outlet of 2.5". I am looking to connect from my main line into the 2.5" mesh irrigation filter. Will i be ok goig from 1" to 2.5", will i encounter any issues?