You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4364 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, July 7th 2006, 2:47am

by SprinklerGuy

Ah. the love em....

Thursday, July 6th 2006, 9:54am

by Bill Painter

See if there's a restriction in the fitting of the head in question, i.e., below the nipple. If that's not it, try the NEXT closest head and fitting on that line before you dig up and replace the whole lateral line between.

Sunday, June 25th 2006, 6:39pm

by xpedient

How long is the stretch from the 2nd to last head to the last head? If its not too long just dig the line up and replace it..

Thursday, June 15th 2006, 8:47am

by kassab

one head on zone low pressure

When I started up my sprinkler for the season all heads are working good except one sprayer at the end of a zone

The head before has about 30 PSI and works perfect but the next one does not have enough pressure to even pop

So I took apart the head and used my garden hose to force water into the line and it got a little better, I feel there is a rock in the line but I don’t know how to fix it

Any suggestions would be wonderful