You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2556 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 23rd 2011, 9:23pm

by hi.todd

You may also have trash in the line that rotors are better for flushing out than sprays. Sprays clog easily. Is there a filter on the pump? What is the supply a lake? Is there a filter on it? :thumbup:

Sunday, May 22nd 2011, 10:55pm

by Mitchgo

Could be a number of issues

Some ideas come to mind

* Broken sprinkler fittings ( Marlexs) on these zones that are robbing the pressure/ and or pipe breaks. >>> Turn the zones on and walk around the zone and all the sprinkler head- look for breaks

*You turned the flow controlles by accident down when you found the valves

*Pump isn't working properly--- 25 psi supply for a sprinkler system really isn't enough.. I mean it takes like 15-20 psi just to open the valve.. Factoring in psi loose due to friction.. You are not getting 25 psi at your sprinkler heads... more like 10 or 15

Monday, May 16th 2011, 7:54am

by Healey

Limited flow from heads on 2 of 4 zones

Dedicate pump has ~ 25 PSI for sprinkler system. All worked great until 2 weeks ago. Two weeks ago, one zone with small non-rotating heads (1/2 circle), had limited water coming from the heads (5 total heads on zone), i.e., spirting on some of the heads, not enough pressure to push all the heads up and provide adequate coverage. This week, in addition to the one zone, another zone, again with non-rotating heads, has the same problem. The zones with rotating heads seem to be working fine. I found the first (not sure how this system is set up) selenoid/valve coming from the contol box, but am not sure why there is only one round box. Any thoughts on problem and how this system may be set up. Only have 4 zones for house.