You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 696 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, May 27th 2012, 10:31am

by Wet_Boots

perform a reset according to mfr instructions

Sunday, May 27th 2012, 9:32am

by kenagain (Guest)

Hunter Pro-C Stations have dropped off my controller

This last week my Hunter Pro-C has lost 7 of my stations and do not identify station numbers above number 3. It's as though they don't exist... What can I do? :huh:

Monday, May 23rd 2011, 12:08am

by Mitchgo

Is the water turned on?

Thursday, May 19th 2011, 8:54am

by Wet_Boots

A rain detector could be preventing watering, or something may have cut the wires to the valves.

Wednesday, May 18th 2011, 5:07pm

by kannan

Hunter Pro-C none of the stations/zones work

My Hunter Pro-C sprinkler system stopped working. On noticing that my lawn was dry, I looked to see if the controller is powered on. It is ON; and set to the "Run" position. The LCD display on the controller seem to be working; it displays correct date and time. But sprinklers did not come ON even though today is a scheduled watering day.

I tried "Manual single station" for zone-1. The LCD display showed an icon saying zone-1 is ON; but none of the sprinklers came ON. Then I tried "manual single station" for the rest of the zones. None of the zones work.

1) What could be the cause of the problem? How do I go about troubleshooting this?
2) I don't know where the valves are located. Grass grown over and covered the lids. How do I find where the valves are located?

Kannan