You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1246 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, May 24th 2011, 4:58pm

by Wet_Boots

Use the existing zones as a guide to what the well can deliver.

Tuesday, May 24th 2011, 4:15pm

by MiamiMan (Guest)

Thanks.

I need to add a couple sprinklers to the back to cover some spots.

Also, I want to add two zones that will cover the sides and the front yards. I would like to know that I am not putting more sprinklers than the pump can handle.

Sunday, May 22nd 2011, 11:12pm

by Mitchgo

What are you trying to figure out here?

Your pump is running at Dynamic 50 PSI when the back yard zone is on.
You don't need to know the static.. because that would burn up the pump

Check the model on your pump and google it up..

It should give you the info what your looking for

for example 1HP 1.5" outlet/inlet 35 gpm max at 60 psi

Sunday, May 22nd 2011, 7:07pm

by MiamiMan (Guest)

How much PSI?

I "inherited" a sprinkler system, it is a well system with a pump.

The back yard has 4 of the Rain Bird pop up impact sprinklers and one impact on a riser.

When the back yard zone is on, the gauge on the pump is at 50psi.

Is there any way to find out the total PSI?