You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2736 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, May 22nd 2011, 11:45pm

by Mitchgo


The purpose of drip is water conservation..

With a well system ( Unless your being charge for usage on your well) Water conservation is not AS important.

If not the netafim I suggest a Side strip spray zone like boots says

Sunday, May 22nd 2011, 11:43pm

by Mitchgo

Netafim is absolutely the best for a hedge line. Install a filter / pressure regulator at the valve. And a flush cap at the end of your lines. Or loop your lines and tee off for your flush cap

A Well system should have a In series filter at the pump/ start of your irrigation system too

Sunday, May 22nd 2011, 11:19pm

by HooKooDooKu

Generally speaking, there is no reason why you can't add a drip irrigation station to an irrigation system. I know rainbird even makes valve kits that include a low-flow valve, pressure regulator, and filter. You just run PVC (I recommend 3/4") underground to the planting bed to be watered. Then for durability, I like to transition from underground to above ground with 1/2" copper, then to drip tubing.

However, Wet_Boots is more of an expert than me, so I'll defer to his judgement.

Based on what I know about irrigation, I can only make the educated guess that the reason for Boot's comment is that a well system is more likely to contain "stuff" that has to be filtered out, and the "maintainence" is constantly cleaning the filters (because drip irrigation requires very fine filtration).

There is different types of drip irrigation, as there are small sprays that throw water in 2' to 5' circles that don't need as fine a filtration as drip emmitters. But again, I'll defer to Boot's experince over my limited knowledge.

Sunday, May 22nd 2011, 10:58am

by Wet_Boots

Drip on a well might become high-maintenance, so maybe a zone or two of bubblers or strip sprays could work.

Sunday, May 22nd 2011, 9:18am

by MiamiMan (Guest)

Best way to water hedges along fence?

I have the grass area of my yard covered with impact sprinklers. I am using a pump hooked up to a well.

I have a hedge that runs along my fence line, I would like to water them without spraying water into the neighbors yard. What would be the best option here? Is it possible to have a hybrid system with drip tubes that run along the hedge? Just a thought. If anyone can help me out with the options, it would be appreciated.