You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4389 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, June 17th 2006, 7:53am

by wishingforrain

Thanks, Pete. [:)]

Thursday, June 15th 2006, 3:50am

by drpete3

If this is a well for your house then it is very easy. when you run your water for your house the pressure in your system begins to drop wehn it gets down to a certain point you have a pressure switch that turns the pump on. So if you tap into your main line your irrigation will work the same. when your sprinkler valve opens water will start flowing and when the pressure drops enough then the pump comes on.

Now here is the most important thing. Your system should be designed around your pumps capacity. If you have too many heads per zone your pump wont supply your system with enough water to have it work properly and if you have too few zones then your pump keeps going on and off. that is bad for the pump. Hint seach this forum for the 5 gallon test and read about that.

Sunday, June 11th 2006, 7:42am

by wishingforrain

Synchranizing Zone Control Sytem w/ Pump

Hi! Hope we can get some help. We have designed our irrigation system and we want to put it on a timer. We have a well in place with a pump. What we need to know do you synchranize a zone control system with the pump and the well? We want to be sure that when the pump is on, the water is flowing. Thanks for any help out there. Also, send rain if you have any extra!