You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1067 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, May 15th 2011, 6:50pm

by mrfixit

Maybe the controller itself is shorting out the transformer.

Sunday, May 15th 2011, 6:46pm

by m&sps

there is nothing else on the wire run, just the pro-c, what would ohm out the field wires do?

Sunday, May 15th 2011, 1:09pm

by Wet_Boots

how does the system wiring ohm out? Any other devices on the branch the controller is on? Lightning?

Sunday, May 15th 2011, 6:18am

by m&sps

Hunter Pro-C Transformer

A customer of mine has a hunter pro-c and it keeps going though transformers, we had a new breaker put into the fuse panel, had new wires run, new outlet, grounded the clock outside, put in a in-line surge protector yet it keeps blowing them. I am not sure what way to go now. any help would be great thanks