You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2779 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Tuesday, May 3rd 2011, 6:55am

by Wet_Boots

Probably better to replace it, since the SRC will be disappearing from the marketplace.

Monday, May 2nd 2011, 5:44pm

by LukeHughes (Guest)


I have the Hunter SRC Plus controller and it read "No AC", so I replaced the transformer. Now it is stuck on just "AC". Any idea as to what is wrong? I've already tried the reset button, before I replaced the battery and after. The controller is 10 years old. Do I need to replace it?

Any help is appreciated.

Monday, May 10th 2010, 8:31am

by Wet_Boots

You already tried a new transformer - pack it in on the old controller.

Sunday, May 9th 2010, 10:03pm

by JA (Guest)

I did remove the battery before pressing reset. Can you tell me how to test the transformer to see if it is working, since it has two exposed wires at the end? Thanks

Sunday, May 9th 2010, 4:16pm

by Wet_Boots

Did you remove the battery before you tried the reset button? These controllers will occasionally die, and nothing will bring them back to life. The transformer is not a factor, as long as it gives you the 24 volts AC (or a bit more) required.

Sunday, May 9th 2010, 2:12pm

by JA (Guest)

Hunter SRC Plus: No AC

Thanks but I forgot to mention that I already tried pressing reset, but it did not bring the controller display back to life. Any other thoughts? Should I try to find an exact match for the transformer?

Sunday, May 9th 2010, 12:02pm

by mrfixit

Try pressing the reset button. It's inside the bottom door. It's located at the top left behind that door.

Sunday, May 9th 2010, 11:27am

by JA (Guest)

Hunter SRC Plus: No AC

I have a Hunter SRC Plus 9 station controller. After 5+ years, display went out completely. I did not have a battery backup, so plugged in a battery and received message "No AC". I tried replacing the power transformer but could not find an exact match. I replaced transformer with a Rain Bird model that is slightly different (original Hunter transformer is larger and shows Output 26VAC 750mA; new Rainbird shows Output 25.5VAC 650mA). With new transformer, the display shows nothing without a battery. I tested the electrical outlet and it is fine. I have not been able to test the original transformer since it has 2 open wires at the end.

Any ideas or recommendations will be appreciated. Thanks