You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3095 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, May 31st 2006, 7:35am

by Rick Hudspeth

I did that and still get the No AC message . . guess I have a bad controller or transformer.

Wednesday, May 31st 2006, 6:54am

by DOORZ

I just got the same controller, and mine came with 2 yellow wires and one green wire. Hook either yellow wire to the AC1 or AC2, and then the other yellow wire to the other. Then connect the Green wire to the GND.

I had no problems with mine, and it works fine

Wednesday, May 31st 2006, 5:13am

by Rick Hudspeth

No AC message on Hunter Pro-C

Just installed a Hunter Pro-C indoor model and am getting a No AC message. The outlet is working, and the unit is wired correctly. The manual indicates that there should be 2 black wires from the transformer connected to the AC connectors in the controller with a green ground wire. My transformer has 2 yellow wires and a green ground wire, so I'm trying to find out if I was shipped the wrong transformer, whether it is not working right, or whether the controller itself is not working right.