You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2615 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, April 26th 2011, 5:36pm

by mrfixit

There's a break in the pipe or if you have poly pipe it could be pinched off...

The problem should be between the last sprinkler that works and the first that doesn't. That first sprinkler that doesn't work might be broke off at the bottom of the riser...

Tuesday, April 26th 2011, 5:14pm

by Timbatema

One Zone looses pressure half way into zone

I have a problem with one of my 6 zones, all other zones work fine. This zone gets ok pressure at the first 3 three sprinkler heads then the last 3 wont even pop up. i have checked the valve and its ok , i have checked the last three heads and no problems found. I put this sprinkler system in 15 years ago and fix all my own stuff, for the first time i am stumped, please help.... Tim