You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2613 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, April 26th 2011, 9:20am

by Wet_Boots

If the controller has power, the backup battery should not drain.

Monday, April 25th 2011, 10:45pm

by ianmac

Richdel 446PrI batterys keep going flat sprinklers wont sart?

Hi All

My wife replaced the 9v battery in the controller as the sations would not work within 3 days the battery was flat the timer is blank.

I checked the tranny OK, all station valves are 30 Ohms no shorts, the relay to start the pump is OK and no fuses blown.All pump and valve work OK in manual control.

I replaced the battery once more still it went flat.

Do you think I need a new controller?