You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2635 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, April 3rd 2011, 10:45pm

by Mitchgo

What kind of Rain Bird controller?

Is it the Rain Bird ESPM?

You get an error, does it say Master Valve Error?

If this is the controller and the error says that, look behind the faceplate ( Where the wires are) And look at the ribbon cable that attaches from the board to the face plate. Can you take the ribbon cable off from BOTH sides? If not this is the issue and you will need to a get a Master Valve Error Strap Replacement

Other issues could be bad wireing connections, improper wiring, bad solenoid, short ect..

Sunday, April 3rd 2011, 12:48pm

by meftekhar


I have a system with 10 zones. when I first tart the system the zone 1 works and then I get a message "main valve error" what do I need to do to fix it?