You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1321 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, March 9th 2011, 8:11pm

by hi.todd

are the 2 set of zones working and nonworking on separate modules? If they are you may have a loose module on the controller. Idea 2, there could be cut wires or a cut common wire to the back yard, or from one group of valves to the next valve.

Start with that and let us know.

:thumbsup: :thumbsup: :thumbsup:

Wednesday, March 9th 2011, 11:31am

by Les

Hunter Pro-C Controller

Have had the system turned off for the winter and when turned on for first time this week, the first 4 zones worked perfectly but the 5th and 6th zones never came on. The timing for each zone was duplicated on the controller so I believe that phase of the programming is ok. What would be the recommendation for a novice "fix-it" man?