You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2672 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, February 28th 2011, 7:25pm

by Mitchell

nelson valves

I took the 3 valves apart, cleaned them blew them out with an air hose, put them back together. STILL LEAKING!

Any ideas as to what to do next?

Sunday, February 27th 2011, 6:38pm

by Mitchell


Thanks, Hi.Todd. The valve that would not come on is bad. Checked it with a meter. Current coming to the valve when the valve should be activated but valve not working.

I checked the valves that were leaking. Apparently, there is some trash in them. I can activate the zone with the solenoid by turning it and cut it off by tightening it but all 3 are still leaking.

Sunday, February 27th 2011, 4:10pm

by hi.todd

Find the valves in the field and then open them up manually by the solenoid and then close the solenoid try to see if the solenoid was loose. Tighten it! Then if there is a manual bleed screw open it. Then close it fairly tight.

Good Luck

:thumbsup: :thumbsup: :thumbsup: :thumbsup:

Sunday, February 27th 2011, 1:29pm

by Mitchell

Nelson Valves

?( I turned my water pump and control box on yesterday. 3 of the 4 valves are leaking whether the timer is on or not. The only one that is not leaking will not come on at all. Any suggestions from anyone?