You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1254 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, February 16th 2011, 9:52pm

by Mitchgo

No You Can't.

Unless you are planning on using the pump to only irrigate zone 1.

The controller only sends power to the specified zone when that zone is running. If you hook your relay to a zone, it will only crank on when that zone is on. That's why the MV/Pump terminal is needed for a pump, it sends power to this terminal on every zone.

Your obviously spending some money on converting over, spend a tad bit more and replace your controller!
I personally Recommend these controllers

Depending on how many zones you have

Rain Bird ESPM 4M

Weathermatic Smarline SL1600 -2400

Hunter Pro C

Wednesday, February 16th 2011, 4:10pm

by SanDiego

Controlling a pump relay from a zone terminal

Can I wire a pump relay to a zone on my controller without blowing up the controller? I am adding a 1.5 HP sprinkler pump to my irrigation system and the controller that I have does not have a master valve/pump control terminal. I figured I could run the wiring for zone one to the zone one valve and the pump relay. Any thoughts?



Thanks in advance!