You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2586 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Friday, March 25th 2011, 9:40pm

by ijaraptor

Thanks

Thanks for the Help.

I ended up putting the R Co replacements after much research on the internet.

Thanks Again. I plan on switching them out this season.

Saturday, February 19th 2011, 3:14pm

by kosterirrigation

http://www.thesource-online.com/pdf/rainbird.pdf

Check page 49

Thursday, February 3rd 2011, 3:18pm

by Central Irrigation

I've got about two of those in the service van. I suppose if I combined all the parts I could get one to work. If you end up swapping it with a different valve, make sure and save it. Those parts are not common, up here anyway.

Thursday, February 3rd 2011, 8:24am

by kosterirrigation

A little late on the reply, but this is a Rainbird EP200F valve

Around the era of the EV series valves the EP was the light commerical valve prior to the introduction of the PGA series valve.



Good luck finding parts.

Wednesday, May 12th 2010, 10:25am

by ijaraptor

Rain Bird Valve Identification Please

Hello,



Recently took over maintenance on a few apartment complex units. I have about 30 of these 2" valves but most of them have bad solenoids.



They are a 2" Globe style. I know they are discontinued from Rain bird, but is there any cross reference for the solenoids on these things?





Thanks in advance.