You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2984 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, June 25th 2006, 5:53pm

by xpedient

Install a Febco 825Y..


Tuesday, June 6th 2006, 6:40pm

by tehachapibackflow

The only advice that I can offer is: if at all possible change out the watts and install a wilkins 975XL this assembly is easy to work on a will not fail as often as a junk watts or febco.


Monday, May 8th 2006, 11:07am

by mama gump

I hope you will get a response! My watts backflow preventer is leaking. It appears to be a slow leak from the relief valve, then run around the unit where it drips off the bottom.

Before re-installing (for the second time), I tried to undo the nuts and take a look inside, but they would not budge!!

I don't know if I have the unit screwed on too tight at the connections at either end, if I need a new O ring, or what.....

I just can't afford a repairman right now....

Thursday, April 27th 2006, 11:38am

by Allen

Leaking Watts backflow device

I have a Watts backflow device that eats O-rings. I can run about 12-15 hours before the O-ring blows and I end up with a fountain in my yard. Is this a systemic problem with this product or is there something else happening that would cause this even if I put on a different system?