You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2758 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, December 4th 2010, 3:38pm

by Wet_Boots

Maybe you should rework the plumbing so that nothing but metal pipe and/or fittings are directly attached to the pump.

Saturday, December 4th 2010, 8:50am

by holidayisle (Guest)

Pump Problems

Hi, I replaced a old 1.5hp pump with a Simer 1.5hp pump. The sprinklers work fine however after a couple of days the discharge pipe comes right off, meaning that the threads are not broken at all just the pipe is out of shape, like it was heated. I replaced the piping and the same thing happened. Simer does not know why? Any help appreciated.